GOMMIS D.O.O. nadgradnja vozila

Low-floor truck

$0.00

Technical data:

Vehicle Renault Master T 35

Perm. Total weight: 3500 kg (ticket Cat B)
Without the bridge empty weight: about 1900 kg
Payload: about 1600 kg (bridge included weight, 650 kg)
Overall length: 6250 mm
Overall width: 2300 mm
Bridge-size (interior dimensions): 3640 x 1640 mm
Loading height max . lifted: 1400 mm

Advantages:

Direct loading and unloading from floor and down ramps up to 1.4 m.
High payload by sophisticated design.
Loading area for 6 SBB size range (1.64 x 3.64 m).
Driving licence category B (PW-class) is sufficient operating.
Secure thanks to a separate facility for electric bikes and hub.
Equipment swap system allows rapid exchange of bridges.
Bridge as an open loading platform and covered in design available.

Description:

Trucks:

Head and train hub frame heck are themselves part ragende unit linked.
Hub framework heck part is U-shaped open trained to the rear for the start
of the swap. Rear suspension with single longitudinal lenker and leaf suspension.
Under the main beam with bridge locking behind the cabin from the left side of
the vehicle to operate.

Renault drivers head MASTER T 35

Cabin:

Cloth seats,
Prepared for radio installation,
Rear window,
3-way adjustable driver's seat.

Colours:

White (389)
Blue (423)
Red (719)
Beige (139) (factory painting)

Transmission:

5-speed synchronous transmission with floor circuit

Stabilizer:

Stabilisator standard front axle
Steer: assistance (servo)
Drive: front wheel drive
Wheelbase: 3578 mm
Total weight: 3500 kg
Tachograph: electronically,
Type: EC,
Mounted heating cooling water heater "DEFA" 220 volts,
including 5 m cable with plug.

Bridge Building:

Dimensions:

Length inside: 3640 mm
In width: 1640 mm
In width outside: 1700 mm
Side Laden - + front wall height: 800 mm
Rear loading height: 800 mm
Overall height in driving position, approximately: 2600 mm

Construction:

Auxiliary chassis, traverses and outside the framework of special aluminum profiles.

Soil:

From Ac-Plankensteiner profiles 40 mm thick, smooth execution, with additional
wooden floor with 12 mm thick screen.

Front wall:

From Ac-box profiles,
25 mm thick,
Height: 800 mm.

Side wall:

From Ac-box profiles 25 mm thick,
Fixed, height: 800 mm.
In the area of the swing arm outside a chrome steel riveted on.
Ac-anodized profiles.

Reloading:

An Overview driving ramp plate (hollow) 800 mm high.
Blachengestell:
A Dutch-Blachengestell from Alurohren with 2 arc and 3 longitudinal rods.
Height in the middle according to the total amount. Arch Inclination: 50 mm.

Blache:

A Blache adapted from Stamoid with the necessary seals, and reinforcements.
Color as desired. Without labels.

Painting:

Painting the hub carriages,
RAL shade of your choice do not lacquered aluminium.
Without painting the cabin (original color).

This product was added to our catalog on Monday 21 December, 2009.